Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Fog Light Bulb

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Light bulb

To access the bulb, simply move the wheel arch liner by unscrewing the bolt with a 10 mm spanner (removing the wheel makes the operation easier by providing more space to manoeuvre, but it can be done without removing it). Once the wheel arch liner is moved, remove the rubber protective cap located behind the bulb holder, unclip the retaining springs of the bulb, and pull it out from its socket; then insert the new bulb (H3 model) without touching the glass with your fingers, secure it with the retaining springs, and connect the power cable. Finally, apply the rubber cap and secure the wheel arch liner.

Updated on 10 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Front Headlight Bulb Replacement
Saab 9 3 (2002-2014 / MK 2) To replace the front headlight bulb, you must remove the headlight itself: open the front bonnet and ensure it is securely supported, remove the plas…
Replacing Front Headlight Bulbs
Replacing Front Headlight Bulbs
Saab 9 3 (2002-2014 / MK 2) To replace the left front headlight bulb, first remove the air filter housing; then remove the rubber cap behind the headlight, disconnect the connec…
Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Saab 9 3 (2002-2014 / MK 2) In this guide, to describe the operations more clearly, the headlight was completely removed from the vehicle and placed on the workbench. Once the h…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos