Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Clutch Pedal Spring on a Saab 9-3

Model: Saab Saab Various

Video tutorial

In this brief and simple guide, you will learn how to remove and replace the return spring of the clutch pedal on a Saab 9-3. First, get into the vehicle and start by removing the original clutch pedal spring, disconnecting it from the cylinder and the pedal; press the pedal to remove it. At this point, check that the clutch pedal does not have too much play; then replace the small supports with new ones, installing the new clutch pedal return spring onto them, following the video tutorial until the end for reassembly!


Updated on 11 August 2026 by ScegliAuto


Related tutorials

Saab Saab Various Follow this guide for instructions on resetting the service light on a Saab 9-3. First, get in the vehicle and turn the ignition on by turning the ke…
Saab Saab Various In this video tutorial, you will see how to remove and replace the central air vents on the Saab 9-3 in simple and quick steps. First, get inside the…
Saab Saab Various In today's video, you will learn how to remove and replace the rear headlamp bulbs on a Saab 9-3, second series. First, open the boot and start by re…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos