Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Exhaust Manifold Gasket

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Engine

Once you have removed the exhaust manifold and the old gasket, clean the gasket seating thoroughly, both on the head and on the manifold, to eliminate any residues and ensure the perfect adhesion of the new gasket. Once cleaning is complete, insert the new gasket between the fixing studs and then apply the manifold, ensuring it adheres evenly. Proceed to tighten the nuts using a torque wrench and a cross-tightening pattern, as used when securing cylinder heads, to ensure the greatest possible uniformity.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Intake Manifold Gasket
Replacement of the Intake Manifold Gasket
Saab 9 5 (1997-2010 / Ys3e, MK 1) Before proceeding with the installation of the intake manifold gasket, ensure that there are no dirt or residue on either the cylinder head side or t…
Replacement of the Complete Engine Gasket Kit
Replacement of the Complete Engine Gasket Kit
Saab 9 5 (1997-2010 / Ys3e, MK 1) First, check with a feeler gauge and an aluminium bar for any tolerances on the seating surface of the cylinder head as shown in the images. Use the …
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Saab 9 5 (1997-2010 / Ys3e, MK 1) Lift the vehicle using a hydraulic lift or suitable axle stands. Position a container with adequate capacity (approximately 5 litres) under the oil s…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos