Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Saab 9 5 MK 1, Ys3e - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Cylinder head

See other generations:
Video tutorial

Open the front bonnet and ensure it is securely supported. Remove the plastic engine cover and disconnect the pipes that run over the rocker cover, which would prevent its removal.

Remove the spark plug coil pack, unscrew all the fixing screws of the rocker cover (it is recommended to use a power screwdriver to ease the task), and take it off along with the gasket; then remove the internal gasket. Apply the new gaskets, ensuring they adhere properly, and refit the cover, tightening all the fixing screws.

Finally, reassemble everything that was previously removed in reverse order.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Saab 9 5 (1997-2010 / MK 1, Ys3e) After thoroughly cleaning the gasket seating on both the cover and cylinder head sides, apply gasket sealant in the grooved areas, place the two gask…
Cylinder Head Bolt Replacement
Cylinder Head Bolt Replacement
Saab 9 5 (1997-2010 / MK 1, Ys3e) When removing the cylinder head to replace the gasket, it is preferable to use a new set of bolts to secure it; before doing so, re-thread the bolt h…
Guide to Replacing the Cylinder Head Gasket
Guide to Replacing the Cylinder Head Gasket
Saab 9 5 (1997-2010 / MK 1, Ys3e) The gasket is a component that fits between the flat surfaces of two joined parts. Usually, these gaskets can become damaged due to severe overheatin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos