Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Leon
    4. : Outside rearview mirror

Seat Leon - Outside rearview mirror

Seat Leon (2005-2013 / 1P)
How to remove the rearview mirror cap of a Seat Leon Cupra
The mirror cap of a Seat Leon Cupra is mounted on the outside rearview mirror simply by interlocking. To remove it, therefore, all we have to do is apply a …read all…
Posted on 6 January 2024 by ScegliAuto
Seat Leon (2012-2019 / 5F, MK 3)
How to proceed with the removal of the cover of a Seat Leon
Let's see how to proceed with the removal of the shell of a Seat Leon. We use our hands to pull the cap off (let's help ourselves with a plastic or metal …read all…
Posted on 13 November 2023 by ScegliAuto
Seat Leon (1999-2005 / 1M)
How to remove the rearview mirror of a Seat Leon
How to remove the rearview mirror of a Seat Leon. With a lever with a plastic or rubber coating, we go to pry between the perimeter of the mirror frame and the …read all…
Posted on 13 November 2023 by ScegliAuto
Car stereo (5) Battery (8) Air Vents (1) Bodywork (2) Glove box (1) Key (17) Timing belt (5) V-belt (1) Air conditioning (1) -board computer (8) Checks and maintenance (68) Dashboard (1) Headlight (2) Tail light (4) Fog lights (2) Air filter (4) Cabin air filter (6) Diesel filter (3) Oil filter (2) Accessory Kit (1) Light bulb (3) Headlight bulb (5) Rear light bulb (4) Interior lights ceiling light bulb (4) License plate light (2) Handle (3) Engine (6) Window motor (1) Engine oil (5) Door panel (16) Front bumper (3) Rear bumper (3) Brake pads (1) Tires (4) Gear Shift Knob (2) Fuel pump (1) Door (3) Window lift button (1) Instrument cluster (12) Fuse box (38) Seat (3) Lock (3) Outside rearview mirror (3) Thermostat (1) Turbine (1) EGR valve (3) Interior blower (2) Side window (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos