Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Seat Leon -

Seat Leon (2012-2019 / mk 3, 5 f)

Seat Leon (2012-2019 / MK 3, 5F)
How to Remove the Third Brake Light on the Seat Leon MK3
Removing the third brake light on the Seat Leon MK3 requires caution, as the lens is quite fragile. Use a trim tool set and a flat screwdriver. Start by prying …Read all…
Posted on 28 July 2026 by ScegliAuto
Seat Leon (2012-2019 / MK 3, 5F)
How to replace the third brake light on the Seat Leon
Today we will explain how to replace the third brake light bulb on Seat Leon vehicles. To perform this operation, we must first keep the car trunk closed so …Read all…
Posted on 6 November 2024 by ScegliAuto
Airbag (4) Shocks (2) Car stereo (4) Battery (6) Air vents (1) Control arm (2) Spark plugs (3) Body (4) Glove compartment (3) Control unit (1) Key (37) Timing belt (13) V-belt (2) Air conditioner (10) A/C controls (1) Onboard computer (3) Checks and maintenance (25) Dashboard (5) Brake rotors (1) Headlight (9) Tail light (5) Fog lights (5) Air filter (5) Cabin air filter (9) Diesel fuel filter (3) Oil filter (2) Parking brake (2) Grille (1) Window switch (1) Accessory kit (1) Light bulb (4) Side marker bulb (1) Headlight bulb (9) Tail light bulb (7) Interior dome light bulb (4) License plate light (4) (2) Handle (3) Engine (6) Power window motor (1) Engine oil (3) Clock (10) Door trim panel (27) Front bumper (7) Rear bumper (4) Brake pads (1) Shift knob (2) Fuel pump (1) Car door (3) Power window switch (1) Instrument cluster (4) Heater core (2) Fuse box (68) Seat (4) Door lock (6) Side mirror (3) Warning light – error code (25) (29) Tire pressure warning light (4) Service warning light (156) Fuel cap (1) Windshield wipers (2) Thermostat (2) Turbocharger (1) EGR valve (4) Blower motor (2) Side window (3)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos