Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the Seat Altea cabin fan.

Model: Seat Altea MK 1 - Years 2004-2015
Part: Blower motor

Following these short and simple steps, we will see how to disassemble and replace the cabin fan of the Seat Altea. First, we get on board the vehicle, on the passenger side, and start by removing the plastic cover located under the glove compartment, unscrewing the fixing screws; inside, we will find the cabin fan, where we will lift the plastic tabs and disconnect the electrical wiring to remove it, as shown in the video. At this point, we carry out the repair or directly replace the cabin fan, applying the reverse procedure for reassembly!

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Seat Altea (2004-2015 / MK 1) Want to remove the heater fan on a Seat Altea? Follow these steps to disassemble the cover pieces to reach the air fan. Open the glove compartment do…
Seat Altea (2004-2015 / MK 1) In this brief and simple guide, we will go through the steps on how to remove and replace the cabin fan resistor on the Seat Altea. First, move to th…
Seat Altea (2004-2015 / MK 1) Start by pressing the button located on the top of the key fob of your Seat Altea to open the physical key. Next, unclip and remove the back of the k…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos