Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Fan on the Seat Altea

Model: Seat Altea MK 1 - Years 2004-2015
Part: Blower motor

Want to remove the heater fan on a Seat Altea? Follow these steps to disassemble the cover pieces to reach the air fan. Open the glove compartment door, then start disassembling the drawer. Unscrew the securing screws of the glove compartment and remove it. Inside the dashboard compartment, you will find the air fan and the electrical connectors. Disconnect the electrical connectors and unscrew the securing screws of the fan. Once all pieces are disassembled, you can pull them out from inside the dashboard. Install the new fan in the front dashboard, then reassemble all the cover pieces.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Seat Altea cabin fan.
Disassembly of the Seat Altea cabin fan.
Seat Altea (2004-2015 / MK 1) Following these short and simple steps, we will see how to disassemble and replace the cabin fan of the Seat Altea. First, we get on board the vehicl…
Replacing the Cabin Fan Resistor on the Seat Altea
Replacing the Cabin Fan Resistor on the Seat Altea
Seat Altea (2004-2015 / MK 1) In this brief and simple guide, we will go through the steps on how to remove and replace the cabin fan resistor on the Seat Altea. First, move to th…
Where are the fuses located in the Seat Altea?
Where are the fuses located in the Seat Altea?
Seat Altea (2004-2015 / MK 1) The fuse boxes present on the Seat Altea contain the fuses that regulate the operation of the devices installed on the car: it will be possible to fi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos