Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulbs in the Seat Alhambra?

Model: Seat Alhambra MK 2 - Years 2010-2020
Part: Fog lights

In this tutorial we can see how to replace the fog light bulbs in the Seat Alhambra, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then go to the front of the headlight in question and, using for example pliers, unhook the plastic frame. Then unscrew the screw that has just been released with a screwdriver with a cross tip, remove the headlight from the housing and disconnect the connector. At this point we can remove the old bulb, insert the replacement and reassemble everything.

Posted on 13 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Seat Alhambra
How to Reset the Service Light on a Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) This tutorial shows how to reset the service light on a Seat Alhambra, a very simple and quick operation to perform only after completing all schedul…
How to Reset the Service on a Seat Alhambra
How to Reset the Service on a Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) In this tutorial, we will see how to reset the service on a Seat Alhambra, a very simple and quick operation to perform only after completing all sch…
How to reset the service in the Seat Alhambra?
How to reset the service in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) Resetting the service in the Seat Alhambra, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must ha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos