Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulb on a Seat Alhambra - Volkswagen Sharan

Model: Seat Alhambra MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light bulb

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the rear light bulb on a Seat Alhambra, as well as a Volkswagen Sharan. First, open the boot lid and start by unscrewing the internal screw of the rear light, removing the side carpet cover.

Then, remove the rear light by separating the lens from the bulb holder to access the bulbs, as shown in the video. At this point, remove and replace the faulty rear lights, install the new ones, and reassemble the rear light!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to calibrate the sliding door of the Seat Alhambra
How to calibrate the sliding door of the Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) .. sliding door of the Seat Alhambra, as well as the Volkswagen Sharan. To reset the sliding door, it is necessary to open the hood, then disconnect the.. …
How to Replace the Front Headlight Bulb on a Seat Alhambra?
How to Replace the Front Headlight Bulb on a Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) To replace the front headlight bulb on a Seat Alhambra, lift the flap located inside the wheel arch corresponding to the bulb you wish to replace. By…
How to Remove the Seats from the Seat Alhambra/Volkswagen Sharan
How to Remove the Seats from the Seat Alhambra/Volkswagen Sharan
Seat Alhambra (2010-2020 / MK 2) .. seats from the Seat Alhambra (and its twin, the Volkswagen Sharan) requires careful attention to the fixings and connectors. For each seat, locate the.. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos