Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Temporary Fix for Sliding Rear Seat on Seat Alhambra

Model: Seat Alhambra MK 1 - Years 2000-2010
Part: Seat

Want to perform maintenance without spending money? Here’s how to temporarily fix the sliding lock piece of the rear seat on a Seat. Press the metal handle located under the seat and observe where it gets stuck as the seat slides. Next, lower the backrest by pressing the lever at the top; you will see the entire seat lift forward, so lock it in place. Remove a small piece of plastic around the seat stop and tape it with suitable adhesive tape. Refit the plastic piece around the stop and try sliding the seat on the rail again.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to calibrate the sliding door of the Seat Alhambra
How to calibrate the sliding door of the Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) Today we will discover the instructions that will allow us to calibrate the rear sliding door of the Seat Alhambra, as well as the Volkswagen Sharan.…
To reset the movement of the sliding door of the Seat Alhambra, what needs to be done?
To reset the movement of the sliding door of the Seat Alhambra, what needs to be done?
Seat Alhambra (2010-2020 / MK 2) If we notice an anomaly in the operation of the electric door of the Seat Alhambra, meaning an anomaly in the way it moves along its track, not openi…
How to Change the Rear Light Bulb on a Seat Alhambra - Volkswagen Sharan
How to Change the Rear Light Bulb on a Seat Alhambra - Volkswagen Sharan
Seat Alhambra (2010-2020 / MK 2) This guide outlines the steps to remove and replace the rear light bulb on a Seat Alhambra, as well as a Volkswagen Sharan. First, open the boot lid …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos