Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located and how to reach it in a Seat Leon?

Model: Seat Leon KL1, KL8 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

The fuse box of a Seat Leon is located on the left side, at the bottom next to the steering column, near the pedal area. To access it, turn off the engine and make sure the vehicle is secure.

Sitting in the driver's seat, look down near the steering column, and you will notice a small plastic panel covering the fuse box. This panel can be easily removed by hand, simply by pulling it towards you, or in some models you may need to use a small tool like a screwdriver to pry it off. Once the panel is removed, you will have direct access to the fuse box. Each fuse is numbered and their function is listed in a legend found both inside the vehicle manual and, in some cases, on the back of the panel itself.

When replacing a fuse, make sure to use one with the same amperage to avoid electrical damage to the vehicle.

After finishing, reattach the panel with the same clips or screws that held it in place.


Posted on 2 April 2025 by ScegliAuto


Related tutorials

Where is the Cabin Fuse Box in the Seat Leon?
Where is the Cabin Fuse Box in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) This video shows where the cabin fuse box is located and how to access it in the Seat Leon MK3. As shown, it is located at the bottom left of the das…
Where to Find the Cabin Fuse Box on a Seat Leon
Where to Find the Cabin Fuse Box on a Seat Leon
Seat Leon (2020-2026 / KL1, KL8) If any components in the cabin of your latest generation Seat Leon are experiencing serious operational issues and you need access to the relevant fu…
Where Are the Fuses on the Seat Leon?
Where Are the Fuses on the Seat Leon?
Seat Leon (1999-2005 / 1M) On the Seat Leon, all the fuses are contained within the single fuse box present in the vehicle: on this model, the box is located on the left side o…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos