Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Seat Ibiza?

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

It will be possible to completely remove the Service message from the instrument panel of the Seat Ibiza by holding down the button located on the right side of the instrument panel, immediately below the speedometer. While holding it down, you will need to insert the ignition key into the corresponding instrument panel and turn it to start the panel.

Once the panel is turned on, you will need to continue holding down the button until the wrench icon turns off and the maintenance interval is reset. To verify that the reset has been done correctly, simply reactivate the instrument panel.


Posted on 10 April 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Ibiza
How to Reset the Service Light on a Seat Ibiza
Seat Ibiza (2017-2026 / KJ, 6F) To completely clear the Service light displayed on the dashboard of the Seat Ibiza, press and hold the button marked "0.0/SET" located at the centre …
How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
How to reset the Service light on a Seat Ibiza?
How to reset the Service light on a Seat Ibiza?
Seat Ibiza (2017-2026 / KJ, 6F) You can completely reset the Service light on a Seat Ibiza by turning on the instrument cluster and navigating through the menu that appears on the c…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos