Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Warning on the Seat Ibiza

Model: Seat Ibiza 6F, KJ - Years 2017-2026
Part: Service warning light

In this brief guide, you will find instructions to reset the routine maintenance (service) warning on the Seat Ibiza. First, get in the vehicle and press and hold the reset button found on the instrument cluster; then, turn on the ignition, waiting for the maintenance key reset prompt to appear, as shown in the video. At this point, release the button and press it again once, confirming and completing the reset of the service warning from the instrument cluster.

Posted on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Seat Ibiza
Resetting the service light on the Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) In this guide we will see the procedure for resetting the inspection (service) warning on the Seat Ibiza. First of all, we get into the car and start…
How to Reset the Tyre Warning Light on a Seat Ibiza
How to Reset the Tyre Warning Light on a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) In today's video, you will see a very simple and quick operation for your Seat Ibiza. Specifically, we will focus on resetting the tyre warning light…
Resetting the tyre pressure warning light on the Seat Ibiza
Resetting the tyre pressure warning light on the Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) Today, we will go through the instructions for resetting the tyre pressure warning light on the Seat Ibiza; before recalibrating the TPMS sensors, en…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos