Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator of the Seat Ibiza 6J

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

To complete the manual reset procedure for the service light of your Seat Ibiza 6J, simply follow the steps described in this new mini guide addressed to you. First of all, you need to reach the driver's seat and make sure the dashboard is turned off. Then, turn on the dashboard and press and hold the "0.0/Set" button located below the display and to the left of the speedometer. While holding down the button, turn off and turn on the dashboard of your Seat Ibiza. Finally, release the "0.0/Set" button and press the one to its left to complete the reset.

Posted on 26 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to reset the Service light on the Seat Ibiza?
How to reset the Service light on the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To reset the Service light on the Seat Ibiza, press the button marked "0.0/SET", located at the centre of the dashboard. While holding this button, t…
How to Reset the Service Light on a 2016 Seat Ibiza?
How to Reset the Service Light on a 2016 Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To reset the Service light on a 2016 Seat Ibiza, press the button labelled "0.0/SET" located at the centre of the dashboard. While holding it down, t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos