Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Press the 0.0/SET button located in the centre of the instrument cluster. This will start the procedure to reset the Service light on the Seat Ibiza.

While holding it down, turn the key to switch on the instrument cluster, keeping the button pressed for a few seconds. Then, release it and press the other button next to the one previously used.

Now you can turn off the instrument cluster; once it is turned back on by turning the key, you will see that the Service light has been completely eliminated.


Posted on 12 June 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Seat Ibiza
Resetting the Service Light on a Seat Ibiza
Seat Ibiza (2017-2026 / KJ, 6F) Briefly, we will discover the instructions that will allow you to reset the service light for the routine maintenance of the engine oil change on a S…
How to reset the Service light on the Seat Ibiza?
How to reset the Service light on the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To reset the Service light on the Seat Ibiza, press and hold the button located on the right side of the instrument cluster, just below the speedomet…
How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos