Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Seat Ibiza?

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Seat Ibiza, press the 0.0/SET button located in the centre of the instrument cluster while it is off. While holding the button down, turn the key to switch on the instrument cluster, keeping the button pressed for a moment.

Then release it and press the other button next to the one you previously used.

You can then turn off the instrument cluster; when it is turned on again by turning the key, you will see that the Service light has been cleared.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
How to Reset the Service Light on the 2020 Seat Ibiza?
How to Reset the Service Light on the 2020 Seat Ibiza?
Seat Ibiza (2017-2026 / KJ, 6F) In this video tutorial, you will learn how to reset the service light on the 2020 Seat Ibiza. For those opting for a DIY approach, this is certainly …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos