Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on Seat Leon

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlight bulb on the Seat Leon, first immobilise the car on a flat surface or place it on a ramp to work safely. Once done, open the front bonnet and, using a star screwdriver, unscrew the two screws that secure the rear cover of the headlight from which you want to replace the bulb.

Remove the plastic cover to access the back of the headlight. Remove the spring that secures the rubber cap for water and humidity protection.

At this point, you can disconnect the power supply and proceed to replace the faulty bulb.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb in the Seat Leon
How to Replace the Headlight Bulb in the Seat Leon
Seat Leon (2005-2013 / 1P) If the headlight bulb in your second series Seat Leon (2005-2013) has suddenly stopped working and you want to replace it, read this guide carefully …
How to Replace the Rear Headlight Bulb on a Seat Leon?
How to Replace the Rear Headlight Bulb on a Seat Leon?
Seat Leon (1999-2005 / 1M) You can replace the rear headlight bulb on a Seat Leon by opening the rear hatch to access the boot. Once open, detach the side panel corresponding t…
How to Replace the Front Headlight Bulb of a Seat Leon
How to Replace the Front Headlight Bulb of a Seat Leon
Seat Leon (2005-2013 / 1P) To replace the right front headlight bulb on a Seat Leon model 1P, follow these steps: Open the vehicle's bonnet and remove the headlight cover locat…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos