Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a Seat Leon 5F MK3

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

This video shows how to remove and replace the front headlight on a Seat Leon 5F, third generation, in simple steps. First, open the bonnet of your car and start by removing all the fixing screws located on the top of the headlight using a Torx screwdriver; then unscrew the two 10 mm screws from the wing and unscrew the screw located inside the 21 mm nut, before removing the front bumper.

At this point, unscrew the T30 Torx screws found underneath and on the sides of the headlight; disconnect the bulb electrical connector to remove it, as shown in the video!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to replace the front headlight on a Seat Leon?
How to replace the front headlight on a Seat Leon?
Seat Leon (2005-2013 / 1P) Hello, today’s objective is to replace the front headlight on your Seat Leon. Start by opening the front bonnet. Next, you will need to remove the fr…
How to Remove the Front Headlamp of the Seat Leon
How to Remove the Front Headlamp of the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) This guide will show you how to remove and replace the front headlamp of the Seat Leon. First, open the bonnet of the vehicle and start unscrewing al…
How do you replace the front headlight cover of the Seat Leon?
How do you replace the front headlight cover of the Seat Leon?
Seat Leon (2005-2013 / 1P) In order to replace the front headlight cover of the Seat Leon, you first need to loosen the screws that secure the headlight assembly to its housing…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos