Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front headlight of the Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Headlight

The steps outlined in this guide will show us how to disassemble and replace the front headlight of the Seat Leon. First, we open the hood of the car and start unscrewing all the fixing screws we find on the top and bottom of the bumper, unscrewing the other screws located on both sides of the front fenders; we gently detach the bumper on the sides until it is completely removed, as shown in the video. Now we unscrew the screws of the headlight assembly and disconnect the electrical connector, removing and replacing the front headlight if necessary; finally, we reassemble and connect everything!

Posted on 4 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight of a Seat Leon?
How to replace the front headlight of a Seat Leon?
Seat Leon (2005-2013 / 1P) Good morning, today's goal is to replace the front headlight of our Seat Leon. Let's start by opening the front hood. After that, we will need to rem…
How do you replace the front headlight cover of the Seat Leon?
How do you replace the front headlight cover of the Seat Leon?
Seat Leon (2005-2013 / 1P) In order to replace the front headlight cover of the Seat Leon, you first need to loosen the screws that secure the headlight assembly to its housing…
Replacement of the turn signal bulb in the front headlight of the Seat Leon.
Replacement of the turn signal bulb in the front headlight of the Seat Leon.
Seat Leon (2005-2013 / 1P) The instructions in this guide will show us how to disassemble and replace the front turn signal bulb of the Seat Leon. First, we open the engine hoo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos