Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to adjust the handbrake of the Seat Ibiza?

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Hand brake
Operation: How to adjust the handbrake of the Seat Ibiza?

To be able to adjust the handbrake of the Seat Ibiza you have to turn off the car, deactivate the handbrake and engage the first, so that the car cannot move. To be able to carry out the adjustment, you need to sit on the rear seats and go to open the cover which is located at the end of the central tunnel, behind the handbrake. Once the lid has been opened, the ashtray must be removed to gain access to the cables. To adjust the hardness of the handbrake, you will need to loosen or tighten the clamp using a 10 wrench. When the adjustment is complete you will be able to reinsert the ashtray and close the lid.


Posted on 25 February 2024 by ScegliAuto



How do you adjust the handbrake of the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To adjust the handbrake of the Seat Ibiza, you need to remove the panel located at the rear of the central tunnel, just behind the handbrake lever. O
How to adjust the handbrake of the Seat Ibiza version 6J
Seat Ibiza (2008-2017 / 6P, 6J) .. In this video we see how to adjust the handbrake of the Seat Ibiza 6J version: the first thing to do is to remove the plastic..
How to adjust the handbrake in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this tutorial, we can see how to adjust the handbrake in the Seat Ibiza, a very simple and quick operation. First of all, we park the vehicle on a

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos