Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the lock on a Seat Ibiza 2

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door lock

See other generations:
Video tutorial

To begin, remove the door panel. Then, unscrew the screws located at the bottom of the panel, as clearly shown in the video.

Using a plastic wedge, remove the cover of the central handle and unscrew the screws underneath. Remove the tray with the window switch buttons and disconnect the connector.

At this point, take out the panel from the door by disconnecting the internal cables. Now you have the lock module in front of you and can remove it by following the images in the video and unscrewing the various bolts that secure it to the door.

Good luck!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Lock Module on a Seat Ibiza
How to Replace the Lock Module on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In this guide, we will see the instructions that will allow us to disassemble and replace the lock module on a Seat Ibiza. First, open the front door…
…
How to Replace the Lock on a Seat Ibiza?
How to Replace the Lock on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial, you will learn how to replace the lock on a Seat Ibiza, a relatively simple operation. First, open the relevant door, then unclip t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos