Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Remote Control Battery on Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

Press the designated side button to extract the manual key from the remote control, as shown in the video. Now split the remote control in half by removing the upper cover where the battery is fixed.

You can use a small flathead screwdriver or a plastic wedge, although you may also manage to do it with your hands. Once done, extract the battery by prying from underneath with the small flat screwdriver.

Insert the new CR2032 battery and reassemble the remote control, obviously proceeding in reverse order. Good luck!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on the Seat Ibiza
How to Replace the Key Battery on the Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Changing the battery in the remote key for the Seat Ibiza is a straightforward task that you can easily do on your own with our guide. Start by openi…
How to Replace the Remote Battery of the Seat Ibiza?
How to Replace the Remote Battery of the Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To replace the remote battery of the Seat Ibiza, press the button located at the top of the device: this will lift the key and allow you to lever it …
How do you replace the battery of the Seat Ibiza remote control?
How do you replace the battery of the Seat Ibiza remote control?
Seat Ibiza (2008-2017 / 6J, 6P) In order to replace the battery of the Seat Ibiza remote control, you need to press the button located on the top of the device: by doing so, you wil…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos