Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

This guide explains in detail how to correctly reset the service light on the Seat Ibiza. The entire procedure is quite simple and can be done in a couple of minutes without the need for any external tools.

First, ensure the car is completely off and then press the hazard light button. At this point, insert the key and turn on the ignition.

Locate the two buttons between the rev counter and the speedometer and hold down the "0.0/Set" button for a few seconds. Release it and do the same with the button to its left.

The reset is complete, and you can turn off the ignition.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
How to Reset the Service Light on a Seat Ibiza
How to Reset the Service Light on a Seat Ibiza
Seat Ibiza (2017-2026 / KJ, 6F) .. In today's video, learn how to reset the service light on a Seat Ibiza currently for sale. First, ensure you only proceed after.. …
How to Reset the Service Light on a 2016 Seat Ibiza?
How to Reset the Service Light on a 2016 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To reset the Service light on a 2016 Seat Ibiza, press the button labelled "0.0/SET" located at the centre of the dashboard. While holding it down, t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos