Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2016 Seat Ibiza?

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a 2016 Seat Ibiza, press the button labelled "0.0/SET" located at the centre of the dashboard. While holding it down, turn the key to switch on the ignition.

The menu will start to scroll: release the button when the message "Reset inspection service?" appears. After releasing the button, press it again until the message "Service reset" appears.

Now, turn off the ignition and turn it back on to check that the light is off. The same procedure applies for resetting the oil light.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
How to Reset the Service Light on a Seat Ibiza 6j
How to Reset the Service Light on a Seat Ibiza 6j
Seat Ibiza (2008-2017 / 6J, 6P) To reset the service light on a Seat Ibiza 6j - after completing the services included in the service interval - get in the vehicle and close the doo…
How to reset the service light on a 2016 Seat Ibiza?
How to reset the service light on a 2016 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) There are two ways to reset the service light on the 2016 Seat Ibiza. The first is probably the simplest, as shown by the YouTuber. With the instrume…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos