Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Ibiza 6j

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

To reset the service light on a Seat Ibiza 6j - after completing the services included in the service interval - get in the vehicle and close the doors. Press the button on the right, next to the speedometer, which displays "0.0/set". While holding this button, turn on the ignition without starting the engine. Release this button and briefly press the one next to it on the left, located next to the rev counter. This operation should now be complete, but let's verify. Turn off the ignition and turn it back on. The service light should now be off.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Seat Ibiza
How to Reset the Service Light on the Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Follow these instructions to reset the service light for routine oil change maintenance on the Seat Ibiza. First, get inside the vehicle and ensure a…
How to Reset the Service Light on a Seat Ibiza?
How to Reset the Service Light on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To reset the Service light on a Seat Ibiza, press the 0.0/SET button located in the centre of the instrument cluster. While holding it down, turn the…
How to Reset the Service Light on a Seat Ibiza 6J
How to Reset the Service Light on a Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6P, 6J) In this guide, you will discover how to manually reset the service light on the instrument cluster of your Seat Ibiza 6J (2008-2017). First, get into…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos