Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Door Panel of a Seat Leon II

Model: Seat Leon 1P - Years 2005-2013
Part: Door trim panel

In this video, see how to remove the door panel of a second-generation Seat Leon. Start by prying off the armrest decoration with a screwdriver. Next, disconnect the speaker cover; it has a mark where you can insert the screwdriver to remove it, and finally, remove the speaker itself. Now, move on to removing the upholstery of the panel by prying it off, starting from the pointed area. At this point, you can begin to remove the screws. After this, to remove the panel, pull it upwards and then extract it while being careful to disconnect the wiring.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Can the tyre pressure reset be done in the Seat Leon?
Can the tyre pressure reset be done in the Seat Leon?
Seat Leon (2005-2013 / 1P) Noticing the tyre warning light on a vehicle means there is a specific issue with the inflation pressure, mainly due to a puncture, a flat tyre, or, …
How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2005-2013 / 1P) Before you start, open the physical key of your Seat Leon by simply pressing the silver button. Begin by prying off the rear cover of the key using a…
Removing the Rear Door Panel on a Seat Leon
Removing the Rear Door Panel on a Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) In this video tutorial, follow the main instructions on how to remove the rear door panel on a Seat Leon from 2012 to 2019, in Cupra version. First, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos