Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel of the Seat Leon Cupra

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

These brief and simple instructions will illustrate how to remove the rear door panel of the Seat Leon Cupra. First, open the rear door and start unscrewing the fastening screws found on the door panel and the opening handle.

Then, pry on the side to detach and remove the panel, disconnecting the electric window switch connector and the handle cable, as shown in the video. At this point, refit the rear door panel, securing it properly and making the necessary connections!


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Reset the Infotainment System on a Seat Leon or Cupra Formentor
How to Reset the Infotainment System on a Seat Leon or Cupra Formentor
Seat Leon (2020-2026 / KL1, KL8) If the infotainment system on your Seat Leon or Cupra Formentor continues to load but fails to turn on, perform a hard reset as follows: press the bu…
How to Remove the Mirror Cap on a Seat Leon Cupra
How to Remove the Mirror Cap on a Seat Leon Cupra
Seat Leon (2005-2013 / 1P) The mirror cap on a Seat Leon Cupra is simply clipped onto the external rear-view mirror. To remove it, apply gentle force, sliding it towards the do…
How to Remove the Front Door Panel of the Seat Leon
How to Remove the Front Door Panel of the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) In this video tutorial, you will see how to remove and replace the front door panel of the Seat Leon, following the instructions below. First, open t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos