Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Outer Door Handle on a Seat Leon MK3

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

In this guide, you will learn how to remove the outer door handle from the front door of a third-generation Seat Leon by following these simple steps. First, open the front door and start by removing the side plastic cap; then use a Torx screwdriver to unscrew the screw found inside, allowing you to remove the lock cylinder, as shown in the video.

At this point, pull the handle to the right and simultaneously pull it towards you to remove it; for reassembly, simply apply the reverse procedure of disassembly!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Seat Leon (2012-2019 / 5F, MK 3) Do you want to remove the exterior handle of the Seat Leon? Here’s how to remove the exterior handle from inside the door. Open the door, remove any …
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, you can see how to remove the external handle on a Seat Leon, a very simple and quick operation. First, open the door in question, …
Seat Leon (2012-2019 / 5F, MK 3) This guide shows how to remove the driver's front seat, as well as the passenger seat, of the Seat Leon. First, open the front door and slide the sea…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos