Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of the Seat Leon

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Seat

See other generations:
Video tutorial

This guide shows how to remove the driver's front seat, as well as the passenger seat, of the Seat Leon. First, open the front door and slide the seat back to access the guide screws; use a ratchet spanner to remove all screws located on the guides, as shown in the video.

At this point, disconnect the electrical connectors found under the seat to lift and remove it from the vehicle; finally, reassemble everything by following the reverse procedure of disassembly!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat of a Seat Leon
How to Remove the Front Seat of a Seat Leon
Seat Leon (2005-2013 / 1P) How to remove the front seat of a Seat Leon? This video explains the procedure. First: move the seat forward (using the electric buttons if available…
How to replace the front headlight on a Seat Leon?
How to replace the front headlight on a Seat Leon?
Seat Leon (2005-2013 / 1P) Hello, today’s objective is to replace the front headlight on your Seat Leon. Start by opening the front bonnet. Next, you will need to remove the fr…
How to Remove the Front Window Regulator in the Seat Leon?
How to Remove the Front Window Regulator in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, see how to remove the front window regulator mechanism in the Seat Leon. First, open the relevant door, then unclip the two small i…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos