Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of a Seat Leon

Model: Seat Leon 1P - Years 2005-2013
Part: Seat

How to remove the front seat of a Seat Leon? This video explains the procedure. First: move the seat forward (using the electric buttons if available) and raise the seat base, then, use a screwdriver to unscrew the screws on the seat rail. Using a socket wrench, unscrew the bolts located at the sides of the sliding rail, move the seat back and remove the fastening bolts at the front of the rail. Finally, disconnect the power connectors for the front seat. Reinstall the front seat by following the disassembly steps mentioned earlier.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Seat Leon
How to Remove the Door Panel of the Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) This guide shows how to dismantle and replace the front door panel of the Seat Leon in simple and quick steps. First, open the front door and start u…
How to disassemble the lock of the Seat Leon
How to disassemble the lock of the Seat Leon
Seat Leon (1999-2005 / 1M) Today we will discover the instructions for disassembling and replacing the lock of the front door of the Seat Leon. First of all, we open the front …
How to remove the rear seats of the Seat Leon
How to remove the rear seats of the Seat Leon
Seat Leon (2005-2013 / 1P) Today we will discover the main steps that will allow us to disassemble the rear seats of the Seat Leon, following the instructions below. First of a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos