Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exterior Handle on Seat Leon

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

Do you want to remove the exterior handle of the Seat Leon? Here’s how to remove the exterior handle from inside the door. Open the door, remove any hole cover caps or seals, and unscrew the screw located at the side of the door with a screwdriver: remove the left or right cover of the handle, then slide the handle out. Remove the door opening handle.

Prepare to install the new exterior handle, then secure the handle, followed by its side cover. Finally, screw in the handle screw to complete the installation.

Open and close the door to test.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to disassemble the door panel of the Seat Leon 1
How to disassemble the door panel of the Seat Leon 1
Seat Leon (1999-2005 / 1M) In this article we will show you how to disassemble the door panel of the Seat Leon 1st series. For this operation you will need a flathead screwdriv…
Removing the Door Panel on a Seat Leon
Removing the Door Panel on a Seat Leon
Seat Leon (2005-2013 / 1P) How to remove the door panel on a Seat Leon? Let's see how to do it. Use a plastic lever to remove the cover of the internal handle, and undo the scr…
Emergency Door Opening for a Seat Leon 5F
Emergency Door Opening for a Seat Leon 5F
Seat Leon (2012-2019 / 5F, MK 3) It may happen that the keyless door opening of your Seat Leon is blocked due to a mechanical failure or lack of electrical power. Here’s how to acces…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos