Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Leon
    4. : How to disassemble the exterior door handle in Seat Leon?

Seat Leon - Video tutorial

Model: Seat Leon 5F, MK 3 - Years 2012-2019
Part: Handle
Operation: How to disassemble the exterior door handle in Seat Leon?

In this tutorial we can see how to disassemble the exterior handle in Seat Leon, an extremely simple and fast operation. First of all, open the door in question, then identify the small plug located on the inner edge and remove it. We then insert a long screwdriver or a hook into the hole, grab the small lever and pull it towards us. At this point we can extract the lock cylinder, grab the handle and separate it from the door by pushing it towards the rear of the vehicle. To assemble the spare part, simply follow the reverse procedure.


Posted on 22 December 2022 by ScegliAuto



How to disassemble the door panel in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial we can see how to disassemble the door panel in the Seat Leon, a very simple and quick operation. First of all, we open the door in
How to disassemble the front door panel of the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) In this video tutorial, we will see how to disassemble and replace the front door panel of the Seat Leon, following the instructions below. First, op
Seat Leon external handle replacement
Seat Leon (2012-2019 / 5F, MK 3) Do we want to remove the external handle of the Seat Leon? Let's see how the external handle is removed from inside the door. We open the door, remov

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos