Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Lights on a Seat Leon?

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Fog lights

Removing the fog lights on a Seat Leon, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not in the ignition, then position yourself in front of the relevant headlamp and unscrew the fixing screw of the outer cover. Next, remove the cover, unscrew the additional screws indicated, and by pulling it towards you and levering around the perimeter, extract the headlamp from the housing. At this point, disconnect the power connector, attach the replacement, and follow the reverse procedure.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light on a Seat Leon
How to Replace the Fog Light on a Seat Leon
Seat Leon (2005-2013 / 1P) To replace the fog light on a Seat Leon, fully turn the vehicle's wheels towards the side of the fog light to create more working space. Remove some …
Replacing the Fog Light on a Seat Leon
Replacing the Fog Light on a Seat Leon
Seat Leon (2005-2013 / 1P) This guide covers the replacement of the fog light fitted to a Seat Leon. To remove the fog light, you must detach the surrounding plastic trim. Unsc…
How to replace the fog light of the Seat Leon
How to replace the fog light of the Seat Leon
Seat Leon (2005-2013 / 1P) Today a new tutorial to independently replace the fog lights of the Seat Leon. To perform the replacement, we remove the protective grille around the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos