Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Seat
  4. :
  5. Leon
  6. : How to disassemble the front door panel of the Seat Leon

Seat Leon - Video tutorial

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Door panel
Operation: How to disassemble the front door panel of the Seat Leon

In this video tutorial, we will see how to disassemble and replace the front door panel of the Seat Leon, following the instructions below. First, open the front door and start unscrewing the fixing screws found under the plastic caps, as well as on the grip handle and the opening handle; then leverage the sides of the panel to detach and remove it, disconnecting the electrical connector of the window switch panel and the handle cable, as shown in the video. At this point, reinstall the door panel, applying the reverse procedure!


Posted on 15 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos