Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Tire pressure warning light

If the tyre pressure warning light on your Seat Leon keeps illuminating for no reason, you must perform the manual reset procedure outlined below. First, insert the key and turn on the ignition. Once done, move to the button panel located below the gear lever and press and hold the "Set" button. Release the button as soon as the TPMS light starts to flash. Finally, press and hold the same button again for a few more seconds and release it completely when the light turns off.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Seat Leon
How to Reset the TPMS Light on a Seat Leon
Seat Leon (2020-2026 / KL1, KL8) Today, we will explain how to reset the tyre pressure on a 2022 Seat Leon. To reset the light, turn on the instrument panel and the onboard computer.…
How to Reset the TPMS Light on the Seat Leon 3
How to Reset the TPMS Light on the Seat Leon 3
Seat Leon (2012-2019 / MK 3, 5F) In this mini guide for all of you with a Seat Leon Mk3 (2012-2019), you will discover how to correctly perform the manual reset of the TPMS light rel…
How to Reset the Tyre Pressure Warning Light on a Seat Leon
How to Reset the Tyre Pressure Warning Light on a Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) Below are the main instructions to reset the tyre pressure warning light on a Seat Leon in simple and quick steps; before performing the reset, ensur…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos