Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to remove and replace the headlight of the Seat Ibiza

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Headlight
Operation: How to remove and replace the headlight of the Seat Ibiza

Today we will see, in this short and simple guide, the steps on how to disassemble and replace the headlight assembly of the Seat Ibiza. First we open the bonnet and start unscrewing the fixing screws that we find on the upper part of the bumper; after which we unscrew the additional screws located on both sides of the front wheel arches and under the bumper, in order to unhook and remove it, as shown in the video. At this point we unscrew all the screws of the headlight to remove it, disconnecting the electrical connector of the bulbs; let's replace it with the new one and reassemble everything, applying the opposite procedure!


Posted on 26 May 2024 by ScegliAuto



How to replace the front headlight bulb of the Seat Ibiza.
Seat Ibiza (2008-2017 / 6P, 6J) This short guide will show you the steps on how to disassemble and replace the headlight bulb of the Seat Ibiza. First, we open the engine hood of ou
How do you replace the front headlight bulb of a Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) Replacing the headlight bulb of the Seat Ibiza is done by opening the hood, so that access to the cover located inside the headlight can be obtained:
How to remove the headlight on Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Let's see how to remove the headlight on Seat Ibiza: open the bonnet by pulling the hood opening lever and put it in safety. After removing the front

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos