Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Seat Leon Mk3

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

To reset the service on the Seat Leon - after completing the required services from the service interval - get in the vehicle, close all four doors, and turn on the ignition. Go to the classic interface. (To change it, click the "view" button).

Click "ok" until the "configuration list" menu opens, then open the "service" menu and select "reset inspection". Confirm. Open the menu again and go to "reset oil change". Confirm.

Check on the multimedia screen if the reset was successful. Click on the vehicle icon at the bottom right.

Slide right to where the car icon is. Click on it. On the left, go to "vehicle status". Go to "service" and check that it indicates the oil change in 365 days or 15,000 miles and inspection in 365 days or 30,000 miles.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Leon MK3
How to Reset the Service Light on a Seat Leon MK3
Seat Leon (2012-2019 / 5F, MK 3) In this very short video guide, you will see the necessary steps to reset the service light on a Seat Leon, MK3 model produced from 2012 to 2019. Fir…
Reset the service reminder on the Seat Leon.
Reset the service reminder on the Seat Leon.
Seat Leon (2012-2019 / 5F, MK 3) Today's information will show us how to reset the maintenance service reminder for the oil change of the Seat Leon's engine. First, we get into the c…
How to reset the service light on the Seat Leon
How to reset the service light on the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) To perform the reset of the service light identified by the symbol of the wrench, on a Seat Leon vehicle we must use the diagnostic socket and an ext…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos