Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Leon MK3

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this very short video guide, you will see the necessary steps to reset the service light on a Seat Leon, MK3 model produced from 2012 to 2019. First, press and hold the "0.0/SET" button located in the centre of the speedometer, then turn on the ignition without starting the engine.

Once this is done, you will see a request to perform the reset appear on the information display.

At this point, release the previous "0.0/SET" button and then press it again to confirm and execute the service reset.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Leon?
How to Reset the Service Light on a Seat Leon?
Seat Leon (2005-2013 / 1P) To reset the Service light on a Seat Leon, press and hold the button located in the centre of the instrument cluster. While holding this button, inse…
How to reset the Service light on a Seat Leon?
How to reset the Service light on a Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) On the Seat Leon, to reset the Service light, press and hold the 0.0/SET button located in the centre of the instrument cluster while it is off. Cont…
How to Reset the Service Light on a Seat Leon?
How to Reset the Service Light on a Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) The procedure to reset the Service light that appears on the instrument cluster of the Seat Leon involves pressing and holding the 0.0/SET button loc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos