Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on a Seat Leon?

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Service warning light

On the Seat Leon, to reset the Service light, press and hold the 0.0/SET button located in the centre of the instrument cluster while it is off. Continue to hold this button and insert the ignition key into the ignition switch, turning it: this will allow you to keep the button pressed for a few seconds until the Service light turns off. Once the reset is successful, you can turn off the instrument cluster by turning the key.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2005-2013 / 1P) To reset the Service light on the Seat Leon, press and hold the button located in the centre of the instrument panel while it is off. Continue holdin…
Seat Leon (2012-2019 / MK 3, 5F) To reset the Service light on a Seat Leon, press and hold the 0.0/SET button located in the centre of the instrument cluster while it is turned off. …
Seat Leon (2005-2013 / 1P) From the instrument cluster of the Seat Leon, you can completely turn off the Service light by holding down the button located in the centre of the i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos