Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the service light on the Seat Leon.

Model: Seat Leon 1P - Years 2005-2013
Part: Service warning light

Today we will see how to reset the maintenance service light for the oil change in the Seat Leon. First, get into the car and start by pressing and holding the button in the center of the dashboard. Then turn the key to position one and wait for the maintenance light to appear on the display, as shown in the video. Next, turn the button to reset the mileage before the next service and then the service light, completing the reset operation.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2012-2019 / MK 3, 5F) To perform the reset of the service light identified by the symbol of the wrench, on a Seat Leon vehicle we must use the diagnostic socket and an ext…
Seat Leon (2020-2026 / KL1, KL8) Today, we will explain how to reset the service light on a 2022 Seat Leon vehicle. To perform the reset, press the OK button on the steering wheel to…
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos