Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Seat Leon?

Model: Seat Leon 1P - Years 2005-2013
Part: Service warning light

To reset the Service light on the Seat Leon, press and hold the button located in the centre of the instrument panel while it is off. Continue holding the button, insert the key into the ignition and turn it to switch on the panel. Once the panel is on, wait a few seconds for the Service light to reset; at the end of the procedure, release the button and switch off the panel.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2012-2019 / MK 3, 5F) On the Seat Leon, to reset the Service light, press and hold the 0.0/SET button located in the centre of the instrument cluster while it is off. Cont…
Seat Leon (2012-2019 / MK 3, 5F) To reset the Service light on a Seat Leon, press and hold the 0.0/SET button located in the centre of the instrument cluster while it is turned off. …
Seat Leon (2005-2013 / 1P) From the instrument cluster of the Seat Leon, you can completely turn off the Service light by holding down the button located in the centre of the i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos