Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip on a Seat Leon

Model: Seat Leon KL1, KL8 - Years 2020-2026
Part: Warning light – error code

In this video, you can see how to reset the Trip on a Seat Leon by following a few simple steps that will guide you through the correct management of your vehicle independently. First, secure your vehicle with the handbrake engaged, then once you are inside your vehicle. Step one, deactivate the ignition. Step two, press and hold the speedometer button. Step three, turn on the ignition. Step four, release the previously pressed button and check that the word "service" appears on the display. Step five, turn the button to the right and wait for about 2 seconds. Step six, turn off the ignition, and the system is reset.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset inspection message on Seat Leon
Reset inspection message on Seat Leon
Seat Leon (1999-2005 / 1M) Thanks to today's very short video tutorial, we can see the entire operation necessary to reset the inspection message on a first-generation Seat Leo…
How to set the time on Seat Leon
How to set the time on Seat Leon
Seat Leon (1999-2005 / 1M) Today, through this very short video guide, we can see the process necessary to change the time on a Seat Leon, first generation model produced from …
How to Reset the Trip Service of the Seat Leon
How to Reset the Trip Service of the Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) In this video, see how to reset the trip service of the third-generation Seat Leon. This operation is quite simple, similar to what occurs in other m…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos