Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Ibiza

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

After performing an oil and filter change on this vehicle as per the maintenance schedule, you must reset the service light that has illuminated on the dashboard. Here are some instructions on how to proceed, and you can also refer to the video if needed.

First, sit in the driver's seat, press the button located on the right side below the odometer on the dashboard and hold it down. Then, turn on the ignition while keeping the button pressed until the display shows INSP. After a few seconds, this indication will disappear, and the service reset will be complete.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Ibiza?
How to Reset the Service Light on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To reset the Service light on a Seat Ibiza, press the 0.0/SET button located in the centre of the instrument cluster. While holding it down, turn the…
How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos