Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Interior Light Fuse Located in the Seat Leon?

Model: Seat Leon KL1, KL8 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Interior dome light bulb

See other generations:
Video tutorial

If the interior light in the Seat Leon suddenly stops working, and the bulbs are in good condition, you can check the status of the respective fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, in the lower area of the dashboard on the driver's side, and is labelled F6. If faulty, ensure you replace it with a spare of the same specifications, 30A, and always work with the vehicle turned off, otherwise, you may damage the various connected devices.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Where is the Window Regulator Fuse in the Seat Leon?
Where is the Window Regulator Fuse in the Seat Leon?
Seat Leon (2005-2013 / 1P) If one of the window regulators in the Seat Leon stops working, the first thing to do is check the corresponding fuse; this video shows its location.…
Where are the Fuses in the Seat Leon?
Where are the Fuses in the Seat Leon?
Seat Leon (2005-2013 / 1P) In the Seat Leon, there are two fuse boxes; the first fuse box is located in the cabin: to the left of the steering wheel under the light switch, the…
What is the reverse light fuse in the Seat Leon?
What is the reverse light fuse in the Seat Leon?
Seat Leon (2020-2026 / KL1, KL8) If the reverse light of our Seat Leon has suddenly stopped working, the first thing to do is check the status of the respective fuse, the location of…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos