Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Window Regulator Fuse in the Seat Leon?

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

If one of the window regulators in the Seat Leon stops working, the first thing to do is check the corresponding fuse; this video shows its location. The fuse in question is located in the box inside the engine compartment, protected by a black cover to the right of the battery.

It is labelled F29 and can be found as either 30A or 50A, depending on whether it is for front-only or front and rear window regulators. If the fuse is damaged, ensure you always use a replacement of the same amperage.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Electric Window Regulator on the Seat Leon 1P?
How to Replace the Electric Window Regulator on the Seat Leon 1P?
Seat Leon (2005-2013 / 1P) In this video, you will see how to replace the electric window regulator on the Seat Leon 1P: you need to remove the inner door panel by taking off t…
How to Remove the Front Window Regulator in the Seat Leon?
How to Remove the Front Window Regulator in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, see how to remove the front window regulator mechanism in the Seat Leon. First, open the relevant door, then unclip the two small i…
How to Replace the Electric Window Regulator on the Seat Leon I
How to Replace the Electric Window Regulator on the Seat Leon I
Seat Leon (1999-2005 / 1M) In this video, see how to replace the electric window regulator on the Seat Leon I; first, remove the door cover. Compare the new part to ensure it i…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos