Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Electric Window Regulator on the Seat Leon 1P?

Model: Seat Leon 1P - Years 2005-2013
Part: Body

In this video, you will see how to replace the electric window regulator on the Seat Leon 1P: you need to remove the inner door panel by taking off the handle cover, pulling from top to bottom, and prying with a plastic spatula, then unscrew the two screws with a star screwdriver. At the bottom of the door, there are two screws to remove, then there will only be support tabs to take off and then the electric connector of the window regulator. Remove the electric connector from the motor and the speaker plug. There are two rubber covers to access the window support, but you will need to hold the glass in the raised position, securing it with tape; remove the window regulator motor and detach the glass from the supports by accessing through the holes where you removed the rubber plugs. If you need to remove the mechanism support, be aware that there are ten screws holding it to the body.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Electric Window Regulator on the Seat Leon I
How to Replace the Electric Window Regulator on the Seat Leon I
Seat Leon (1999-2005 / 1M) In this video, see how to replace the electric window regulator on the Seat Leon I; first, remove the door cover. Compare the new part to ensure it i…
Where is the Window Regulator Fuse in the Seat Leon?
Where is the Window Regulator Fuse in the Seat Leon?
Seat Leon (2005-2013 / 1P) If one of the window regulators in the Seat Leon stops working, the first thing to do is check the corresponding fuse; this video shows its location.…
How to Remove the Front Window Regulator in the Seat Leon?
How to Remove the Front Window Regulator in the Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) In this tutorial, see how to remove the front window regulator mechanism in the Seat Leon. First, open the relevant door, then unclip the two small i…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos