Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Seat Leon

Model: Seat Leon 1P - Years 2005-2013
Part: Key

Before you start, open the physical key of your Seat Leon by simply pressing the silver button. Begin by prying off the rear cover of the key using a small flathead screwdriver. By doing this, you will reach the dead battery. At this point, remove it, and you will have completed the disassembly. To install the new battery and close the key, simply repeat these few steps in reverse, and the replacement of the Seat Leon key battery will be complete.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) Start by extracting the physical key from your Seat Leon by pressing the silver button located at the top of the key. Once done, you need to unclip t…
How to Replace the Key Fob Battery on a Seat Leon
How to Replace the Key Fob Battery on a Seat Leon
Seat Leon (2012-2019 / MK 3, 5F) To replace the battery in the key fob of the Seat Leon, press the button on the top of the device to release the key, allowing you to leverage it out…
How to Replace the Remote Key Battery on a Seat Leon?
How to Replace the Remote Key Battery on a Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) You can replace the remote key battery on a Seat Leon by pressing the button located on the top of the device: this will lift the key blade, allowing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos