Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on Seat Leon MK2

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

This video tutorial shows how to remove and replace the engine battery on a second series Seat Leon, in Cupra version. First, open and lift the bonnet of your car and open the battery cover; then, using a socket wrench with an extension, undo the 13 mm bolt located at the bottom, as shown in the video.

At this point, disconnect the two battery terminals (positive and negative) and remove the battery, replacing it with the new one; simply apply the reverse procedure and follow the video to the end for reassembly!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2005-2013 / 1P) Before you start, open the physical key of your Seat Leon by simply pressing the silver button. Begin by prying off the rear cover of the key using a…
How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) Start by extracting the physical key from your Seat Leon by pressing the silver button located at the top of the key. Once done, you need to unclip t…
Battery Replacement on Seat Leon
Battery Replacement on Seat Leon
Seat Leon (1999-2005 / 1M) Is the battery of your Seat Leon flat? Here’s how to replace it. Open the car door and pull up the engine compartment release lever located at the bo…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos