Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel in a Seat Leon?

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Removing the tailgate panel of a Seat Leon is a very simple and quick operation; let's see how to proceed in this tutorial. Start by fully opening the tailgate, then unclip the two side panels, grip the panel from the outer edges, and pulling downwards, begin to unclip it. Once completely removed, move on to the remaining frame of the cover using the same procedure.

If needed, use a plastic spatula to avoid leaving any marks. To reassemble everything, simply clip the various elements back into place.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Removing the Rear Hatch Panel on the Seat Leon
Removing the Rear Hatch Panel on the Seat Leon
Seat Leon (2005-2013 / 1P) Below are the steps to remove and replace the rear door panel and how to repair the lock on the Seat Leon. First, open the boot lid and start unscrew…
How to Remove the Rear Tailgate Panel of the Seat Leon?
How to Remove the Rear Tailgate Panel of the Seat Leon?
Seat Leon (2020-2026 / KL1, KL8) To remove the rear tailgate panel of the Seat Leon, you need to open the tailgate so that you can identify the corresponding internal trim panel: thi…
How to open a stuck boot lid on the Seat Leon?
How to open a stuck boot lid on the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In the Seat Leon, it may happen that the boot lid gets stuck, for example, due to a fault with the control button or the lock actuator. In these case…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos